Scope of work

Four appliances.
Every surface.

Each service follows the same standard: pulled out, broken down, and cleaned inside, outside, behind and underneath. No appliance leaves half-done.

The process

How a detail actually happens.

STEP 01

Inside

Drums, gaskets, racks, shelving and interior walls are broken down and scrubbed by hand.

STEP 02

Outside

Exterior panels, handles, control panels and glass are degreased, cleaned and polished.

STEP 03

Behind

The unit is pulled from its space to reach coils, vents and connections you can't see.

STEP 04

Underneath

Dust, spills and debris that settle under the appliance are cleared and cleaned out.

By appliance

What's included, unit by unit.

01 / Dryers

Dryer Detailing

Lint doesn't stop at the trap. We go past it.

  • Drum interior scrub & sanitize
  • Lint trap housing & internal lint path
  • Vent connection check and clean-out
  • Exterior panels, door glass & controls
  • Pulled out — behind & underneath cleaned
02 / Refrigerators

Refrigerator Detailing

Shelves out, coils clear, seals reset.

  • Interior walls, shelves, bins & drawers
  • Door gaskets & seals cleaned and conditioned
  • Condenser coil dusting for efficiency
  • Exterior panels & handles polished
  • Pulled out — behind & underneath cleaned
03 / Ovens

Oven Detailing

Baked-on grease, actually removed.

  • Interior cavity, racks & broiler pan degreased
  • Door glass — inside and out, edge to edge
  • Knobs, igniters & control panel detailed
  • Exterior panels & handles polished
  • Pulled out — behind & underneath cleaned
04 / Washing Machines

Washing Machine Detailing

Where the mildew smell actually lives.

  • Drum interior scrub & sanitize
  • Rubber boot / gasket deep clean, mold treatment
  • Detergent & softener dispenser breakdown
  • Exterior panels & controls detailed
  • Pulled out — behind & underneath cleaned
The full breakdown

Every point we check. Every step we take.

Open any appliance below to see the full inspection and cleaning protocol, plus how it stacks up against a typical wipe-down service.

Washing Machine

Full inspection and deep clean, front load or top load

18-Point Inspection · 11-Step Cleaning Process
Our process includes
  • Inspecting leveling, hoses, and drain routing
  • Checking drum rotation, spin cycle, and door seal function
  • Fully removing and deep cleaning the detergent & softener dispenser
  • Clearing lint, hair, and debris from the drain pump filter
  • Hand-scrubbing the drum interior and rubber door gasket
  • Steam treatment to lift odor-causing residue and mineral buildup
  • Detailing exterior panels, control panel, and door glass
  • Pulling the unit out to clean behind and underneath
  • Reassembling and running a final operational check
CategorySpotless DetailTypical Wipe-Down
Installation & SafetyFull check of leveling, hoses & drain routingVisual check only
Drum & GasketHand-scrubbed, mold treatment includedDamp cloth wipe
DispenserRemoved & disassembled for deep cleanExterior wipe only
Steam TreatmentIncludedNot included
Behind & UnderneathPulled out, both cleanedNot included

Refrigerator

Full inspection and deep clean, French door, side-by-side or top freezer

22-Point Inspection · 14-Step Cleaning Process
Our process includes
  • Inspecting leveling, door alignment, and seal contact
  • Checking interior temperature and door seal integrity
  • Removing shelves, bins, and drawers for individual cleaning
  • Deep cleaning interior walls, tracks, and drainage channel
  • Cleaning and conditioning door gaskets to preserve the seal
  • Dusting and cleaning the condenser coils and fan area
  • Steam treatment on stubborn interior spills and residue
  • Detailing exterior panels, handles, and stainless finish
  • Pulling the unit out to clean behind and underneath
  • Reassembling and running a final operational check
CategorySpotless DetailTypical Wipe-Down
Installation & SafetyFull check of leveling & door alignmentVisual check only
Interior CleaningShelves/bins removed & cleaned individuallyWiped in place
Coil & Fan CareDusted & cleanedNot included
Gasket CareCleaned & conditionedWiped only
Behind & UnderneathPulled out, both cleanedNot included

Dryer

Full inspection and deep clean, gas or electric

16-Point Inspection · 10-Step Cleaning Process
Our process includes
  • Inspecting leveling, venting connection, and power cord condition
  • Checking drum rotation and heating operation
  • Clearing lint from the trap housing and internal lint path
  • Inspecting and cleaning the vent connection point for blockage
  • Hand-scrubbing the drum interior and wiping interior walls
  • Detailing exterior panels, door glass, and control panel
  • Pulling the unit out to clean behind and underneath
  • Reassembling and running a final operational check
CategorySpotless DetailTypical Wipe-Down
Installation & SafetyFull check of leveling & vent connectionVisual check only
Lint PathTrap housing & internal path clearedLint trap only
Drum InteriorHand-scrubbed & wiped downNot included
Vent ConnectionInspected & cleaned for blockageNot included
Behind & UnderneathPulled out, both cleanedNot included

Oven

Full inspection and deep clean, freestanding or wall oven

17-Point Inspection · 12-Step Cleaning Process
Our process includes
  • Inspecting door hinge, seal, and igniter/element condition
  • Checking knobs, controls, and interior lighting function
  • Degreasing the interior cavity, racks, and broiler pan
  • Deep cleaning door glass inside and out, edge to edge
  • Detailing the control panel and exterior handles
  • Detailing exterior panels and stainless finish
  • Pulling the unit out to clean behind and underneath
  • Reassembling and running a final operational check
CategorySpotless DetailTypical Wipe-Down
Installation & SafetyFull check of hinge, seal & igniterVisual check only
Interior DegreaseCavity, racks & broiler pan degreasedNot included
Door GlassCleaned inside & out, edge to edgeExterior wipe only
Control PanelDetailed & testedWiped only
Behind & UnderneathPulled out, both cleanedNot included
Optional add-ons

A little extra, where it counts.

Odor & Sanitize Treatment

An added sanitizing pass for washers and refrigerators that need more than a wipe-down.

Stainless Exterior Polish

Streak-free, fingerprint-resistant polish finish on stainless steel exteriors.

Dryer Vent Line Clean-Out

Extended clean-out of the exterior vent line, not just the connection point.

Infestation Markup

Applies when pests are present and extra precautions or treatment are required.

Bio-Hazard Markup

Applies when biohazard conditions require extra protective handling and disposal.

Appliance Operational Diagnostics

We identify and pinpoint faulty components that may need service, repair, or replacement, and make recommendations.

See what it costs.

PACKAGES  /  MEMBERSHIPS  /  ADD-ONS

View Pricing